Download Print this page

Advertisement

Quick Links

UniStream
This guide provides basic installation information for specific UniStream
Guide models with built-in I/O. Technical specifications may be downloaded from the
Unitronics website.
General Features
Unitronics' UniStream 5" are PLC+HMI All-in-One programmable controllers that comprise
a built-in CPU, an HMI panel, and built-in I/Os.
The series is available in two versions: UniStream 5" and UniStream 5" Pro. Note that
model numbers including:
B5 refer to standard UniStream 5" (e.g. US5-B5-RA28)
B10 refer to UniStream 5" Pro (e.g. US5-B10-RA28)
B10 models offer additional features, detailed below.
HMI
Power
Features
I/O
Options
COM
Options
COM
Protocols
Programming
Software
Differences
between B5
and B10
Unitronics
®
5"
 Resistive Color Touch-screens
 Rich graphic library for HMI design
 Built-in Trends and Gauges, auto-tuned PID, data tables, data
sampling, and Recipes
 UniApps™: Access & edit data, monitor, troubleshoot & debug and
more – via HMI or remotely via VNC
 Security: Multi-level password protection
 Alarms: Built-in system, ANSI/ISA standards
 Built-in I/O configuration, varies according to model
 Local I/O via UAG-CX series I/O expansion adapters and standard
UniStream Uni-I/O™ modules
 Remote I/O via EX-RC1
 Built-in ports: 1 Ethernet, 1 USB host, 1 Mini-B USB device port
 Serial and CANbus ports may be added via UAC-CX modules
 Fieldbus: CANopen, CAN Layer2, MODBUS, EtherNetIP and more.
Implement any serial RS232/485, TCP/IP, or CANbus third-party
protocols via Message Composer
 Advanced: SNMP Agent/Trap, e-mail, SMS, modems, GPRS/GSM,
VNC Client, FTP Server/Client
All-in-One software for hardware configuration, communications, and
HMI /PLC applications, available as a free download from Unitronics.
Feature
System Memory
Audio Jack
Video/RSTP Support
Web Server
SQL Client
Installation Guide:
US5-B5-RA28, US5-B10-RA28
US5-B5-TA30, US5-B10-TA30
B5
3GB
No
No
No
No
to download
®
5" Installation
B10 (Pro)
6GB
Yes
Yes
Yes
Yes
SCAN
1

Advertisement

loading

Summary of Contents for Unitronics UniStream 5 inch

  • Page 1 Guide models with built-in I/O. Technical specifications may be downloaded from the Unitronics website. General Features Unitronics’ UniStream 5" are PLC+HMI All-in-One programmable controllers that comprise a built-in CPU, an HMI panel, and built-in I/Os. The series is available in two versions: UniStream 5" and UniStream 5" Pro. Note that model numbers including: ...
  • Page 2 Use caution.  All examples and diagrams are intended to aid understanding, and do not guarantee operation. Unitronics accepts no responsibility for actual use of this product based on these examples.  Please dispose of this product according to local and national standards and regulations.
  • Page 3 UniStream 5" Pro only. This 3.5mm Audio jack enables you to connect external audio equipment. Built-in I/O Model-dependent. Present in models with built-in I/O configurations. Uni-COM™ CX Connection point for up to 3 stack-on modules. These are available Module Jack by separate order. Unitronics...
  • Page 4 For exact dimensions, please refer to the Mechanical Dimensions shown below. Mechanical Dimensions 5” Panel Allow space for modules to be snapped onto the back of the controller, if required by your application. Modules are available by separate order. Unitronics...
  • Page 5 First Use The battery is protected by a removable cover on the side of the controller. The battery is supplied installed inside the unit, with a plastic tab preventing contact which must be removed by the user. Unitronics...
  • Page 6  To avoid damaging the wire, use a maximum torque of 0.5 N·m (5 kgf·cm).  Do not use tin, solder, or any substance on stripped wire that might cause the wire strand to break.  Install at maximum distance from high-voltage cables and power equipment. Unitronics...
  • Page 7 Ensure shield continuity when extending shielded cables.  For detailed information, refer to the document System Wiring Guidelines, located in the Technical Library in the Unitronics’ website. Wiring the Power Supply The controller requires an external power supply.  In the event of voltage fluctuations or non-conformity to voltage power supply specifications, connect the device to a regulated power supply.
  • Page 8 Each group may be wired together as sink or source. Inputs I10, I11, I12 and I13 can be configured as either normal digital inputs or as high speed inputs that can receive high speed pulse signals from sensors or shaft encoders. Unitronics...
  • Page 9  Input modes are set both by wiring and software. Input wiring, sink Input wiring, source High Speed Input wiring, sink High Speed Input wiring, source Use sink input wiring to connect a sourcing (pnp) device. Use source input wiring to connect a sinking (npn) device. Unitronics...
  • Page 10 The mode is determined both by wiring and by the hardware configuration within the software application.  Voltage and current modes use distinct points. Connect only the point associated with the selected mode; leave the other point unconnected. Voltage Differential Single-ended Current 2-wire 3-wire 4-wire Unitronics...
  • Page 11  Use isolated-junction thermocouples, or, if you are not using the analog inputs, you may use up to one exposed-junction thermocouple;  Electrically isolate exposed-junction thermocouples from other electrically-conductive parts of the system. Unitronics...
  • Page 12  When connecting 3- or 4-wire RTDs, make sure to use conductors of the same type, width, and length for all RTD wires, otherwise the accuracy will degrade.  When connecting 4-wire RTDs, use 3-wire cable and leave the unused wire unconnected with minimal length. 2-wire 3-wire 4-wire Unitronics...
  • Page 13 Output’s power supply The use of any of the outputs requires an external 24VDC power supply as shown in the accompanying figure. Outputs Connect the +VO and 0VO terminals as shown in the accompanying figure. O0-O9 share common return 0VO. Unitronics...
  • Page 14 The information in this document reflects products at the date of printing. Unitronics reserves the right, subject to all applicable laws, at any time, at its sole discretion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the forgoing from the market.

This manual is also suitable for:

Us5-b5-ta30Us5-b5-ra28Us5-b10-ra28Us5-b10-ta30