Download Print this page
Unitronics US5-B5-RA28 Installation Manual

Unitronics US5-B5-RA28 Installation Manual

Hide thumbs Also See for US5-B5-RA28:

Advertisement

Quick Links

UniStream
Built-in
This guide provides basic installation information for specific UniStream
built-in I/O. Technical specifications may be downloaded from the Unitronics website.
General Features
Unitronics' UniStream
that comprise a built-in CPU, an HMI panel, and built-in I/Os.
The series is available in two versions: UniStream Built-in and UniStream Built-in Pro.
Note that a model number that includes:
B5 refers to UniStream Built-in
B10 refers to UniStream Built-in Pro.
B10 models offer additional features, detailed below.
HMI
Power
Features
I/O
Options
COM
Options
COM
Protocols
Programming
Software
Differences
between B5
and B10
Unitronics
®
®
Built-in series are PLC+HMI All-in-One programmable controllers
 Resistive Color Touch-screens
 Rich graphic library for HMI design
 Built-in Trends and Gauges, auto-tuned PID, data tables, data
sampling, and Recipes
 UniApps™: Access & edit data, monitor, troubleshoot & debug and
more – via HMI or remotely via VNC
 Security: Multi-level password protection
 Alarms: Built-in system, ANSI/ISA standards
 Built-in I/O configuration, varies according to model
 Local I/O via UAG-CX series I/O expansion adapters and standard
UniStream Uni-I/O™ modules
 Remote I/O via EX-RC1
 Built-in ports: 1 Ethernet, 1 USB host, 1 Mini-B USB device port
 Serial and CANbus ports may be added via UAC-CX modules
 Fieldbus: CANopen, CAN Layer2, MODBUS, EtherNetIP and more.
Implement any serial RS232/485, TCP/IP, or CANbus third-party
protocols via Message Composer
 Advanced: SNMP Agent/Trap, e-mail, SMS, modems, GPRS/GSM,
VNC Client, FTP Server/Client
All-in-One software for hardware configuration, communications, and
HMI /PLC applications, available as a free download from Unitronics.
Feature
System Memory
Audio Jack
Video/RSTP Support
Web Server
SQL Client
Installation Guide
US5-B5-RA28, US5-B10-RA28,
US5-B5-TA30, US5-B10-TA30
US7-B5-RA28, US7-B10-RA28,
US7-B5-TA30, US7-B10-TA30
US10-B5-RA28, US10-B10-RA28,
US10-B5-TA30, US10-B10-TA30
B5
3GB
No
No
No
No
®
models with
B10 (Pro)
6GB
Yes
Yes
Yes
Yes
1

Advertisement

loading

Summary of Contents for Unitronics US5-B5-RA28

  • Page 1 US10-B5-RA28, US10-B10-RA28, US10-B5-TA30, US10-B10-TA30 This guide provides basic installation information for specific UniStream ® models with built-in I/O. Technical specifications may be downloaded from the Unitronics website. General Features Unitronics’ UniStream ® Built-in series are PLC+HMI All-in-One programmable controllers that comprise a built-in CPU, an HMI panel, and built-in I/Os.
  • Page 2 Use caution.  All examples and diagrams are intended to aid understanding, and do not guarantee operation. Unitronics accepts no responsibility for actual use of this product based on these examples.  Please dispose of this product according to local and national standards and regulations.
  • Page 3 Pro models only. This 3.5mm Audio jack enables you to connect external audio equipment. Built-in I/O Model-dependent. Present in models with built-in I/O configurations. Uni-COM™ CX Connection point for up to 3 stack-on modules. These are available Module Jack by separate order. Unitronics...
  • Page 4 Installation Space Considerations Allocate space for:  the controller  any modules that will be installed  access to ports, jacks, and the microSD card slot For exact dimensions, please refer to the Mechanical Dimensions shown below. Mechanical Dimensions UniStream 5” Unitronics...
  • Page 5 UniStream ® Built-in UniStream 7" Unitronics...
  • Page 6 UniStream ® Built-in UniStream 10.1" Allow space for modules to be snapped onto the back of the controller, if required by your application. Modules are available by separate order. Unitronics...
  • Page 7 4. Tighten the bracket screws against the panel. Hold the brackets securely against the unit while tightening the screws. When properly mounted, the panel is squarely situated in the panel cut-out as shown below.  The necessary torque is 0.35 N·m (3.5 kgf·cm). Caution UniStream 5” UniStream 7” Unitronics...
  • Page 8 UniStream ® Built-in UniStream 10.1” Unitronics...
  • Page 9 3. Insert the battery, ensuring that the polarity is aligned with the polarity marking as shown in the accompanying figure. 4. Replace the battery cover. 5. Dispose of the used battery according to local and national standards and regulations. Unitronics...
  • Page 10 ) to the earth of the system (preferably to the metal cabinet chassis). Use the shortest and thickest wires possible: less than 1m (3.3’) in length, minimum thickness 14 AWG (2 mm  Connect the power supply 0V to the earth of the system. Unitronics...
  • Page 11 Ensure shield continuity when extending shielded cables.  For detailed information, refer to the document System Wiring Guidelines, located in the Technical Library in the Unitronics’ website. Wiring the Power Supply The controller requires an external power supply.  In the event of voltage fluctuations or non-conformity to voltage power supply specifications, connect the device to a regulated power supply.
  • Page 12 Top groups Input connection points Bottom group Output connection points The function of certain I/Os may be adapted via wiring and software settings. US5-Bx-TA30, US7-Bx-TA30, US10-Bx-TA30 Unitronics...
  • Page 13  Input modes are set both by wiring and software. Input wiring, sink Input wiring, source High Speed Input wiring, sink High Speed Input wiring, source Use sink input wiring to connect a sourcing (pnp) device. Use source input wiring to connect a sinking (npn) device. Unitronics...
  • Page 14 The mode is determined both by wiring and by the hardware configuration within the software application.  Voltage and current modes use distinct points. Connect only the point associated with the selected mode; leave the other point unconnected. Voltage Differential Single-ended Current 2-wire 3-wire 4-wire Unitronics...
  • Page 15  Use isolated-junction thermocouples, or, if you are not using the analog inputs, you may use up to one exposed-junction thermocouple;  Electrically isolate exposed-junction thermocouples from other electrically-conductive parts of the system. Unitronics...
  • Page 16  When connecting 3- or 4-wire RTDs, make sure to use conductors of the same type, width, and length for all RTD wires, otherwise the accuracy will degrade.  When connecting 4-wire RTDs, use 3-wire cable and leave the unused wire unconnected and of minimal length. 2-wire 3-wire 4-wire Unitronics...
  • Page 17 Output’s power supply The use of any of the outputs requires an external 24VDC power supply as shown in the accompanying figure. Outputs Connect the +VO and 0VO terminals as shown in the accompanying figure. O0-O9 share common return 0VO. Unitronics...
  • Page 18 The information in this document reflects products at the date of printing. Unitronics reserves the right, subject to all applicable laws, at any time, at its sole discretion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the forgoing from the market.