Table of Contents
Advertisement
Software
6
Genio 510 EVK is supported by two different software stacks: Android and Yocto. The pre-installed software for Genio
•
510 EVK is Android.
Another software stack, IoT Yocto, is also provided as a separate download. The following sections describe how to
•
build, get, and flash the images for Android and Yocto system respectively.
6.1
Android
6.1.1
Android Software Project and Configuration
6.1.2
How to get Android Software Image
Please contact with your VAR, Distributor, MediaTek FAE.
6.1.3
Android Software Image Flash method
Following steps can reflash the system codes of Genio 510 EVK board.
1.
Connect ADB port to PC via Micro USB (CON480)
2.
Execute MediaTek Flash Tool
3.
Select the proper Download-XML file
4.
Select the download mode ("Firmware Upgrade" is preferred.)
5.
Start download by pressing the button of "Download"
6.
Plug in the DC power cord , the downloader will start
Note:
If the downloader does not start.
Press Download button and plug in the DC power cord will execute a force download.
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.
Table 6-1. Android Project name and Configuration
Project Name
AIOT8370P1_64_BSP
AIOT8370P2_64_BSP
Configuration
IoT EVK+PCIE MT7921 (J4000)
IoT EVK+SDIO MT7921 (J4001)
Genio 510 EVK
Genio 510 Evaluation Kit User Guide
29
Advertisement
Table of Contents
