Table of Contents
Advertisement
How to Install Difference Software into Genio 510 EVK
6.3
Please note that the storage partition layout of Android and Yocto are different, and the boot flow is also different.
6.3.1 To Flash IoT Yocto
When flashing IoT Yocto images by referring below gitlab link,
be
erased, as the IoT Yocto flash tool always format the storage partitions, making the steps the same regardless the
existing image on the board storage.
https://mediatek.gitlab.io/aiot/team-mtk-aiot-sw-ss2/aiot-dev-guide/staging/sw/yocto/get-started/flash/flash-g700-
evk.html
6.3.2 To Flash Android
To flash Android images to a board with IoT Yocto images already flashed, you'll need to:
A.
Configure the "Format" option as "Format whole flash":
B.
Select "Format All + Download" option before flashing the Android image:
C.
You need to manually set the board into "Download Mode" by keeping pressing the "Download" button on the
EVK while resetting the board.
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.
eMMC storage (except for data stored in eMMC RPMB) will
Genio 510 EVK
Genio 510 Evaluation Kit User Guide
32
Advertisement
Table of Contents
