Appendix; Troubleshooting On Camera Application Icon Disappearance; Figure 7-1. Factory Reset - MEDIATEK Genio 510 User Manual

Genio 510 EVK
Genio 510 Evaluation Kit User Guide
7

Appendix

7.1

Troubleshooting on Camera Application Icon Disappearance

If we lack of installing the camera sensor on the EVK while booting 1st time on Android OS, the camera application icon will
disappear, and you can follow the below recovery steps to fix it.
Step:
1. Power off the Genio 510 EVK
2. Install camera Board in Camera CSI0 connector or Camera CSI1 connector then power on Genio 510 EVK
3. Execute Factory reset :
Settings -> System -> Reset options -> Erase all data (factory reset) -> ERASE ALL DATA -> ERASE ALL DATA
4. Genio 510 EVK will auto power on
5. Check the camera function
Camera Icon Disappears
Setting System Reset Option
Erase all data (factory reset)
ERASE ALL DATA Check camera function after boot
ERASE ALL DATA

Figure 7-1. Factory reset.

33
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.