Recording Title On A Tape In The; Recording A Title While Transferring A; Aiina - Hitachi VM-E555LA Instruction Manual

Recording Title on a Tape in the Camcorder
1 Hold down the red button on the CAM/
OFF/ VIDEO switch while sliding the switch to
CAM.
2: Locate the point of the tape where you wish to
record the title ("Using Quick Edit," p50).
® Press the TITLE ON/OFF button on the remote
control.
Use the PLAY button to select the title (the title
you have created or the existing title in cam-
corder you have memorized on page 53) you
wish to record.
5 Press the Start/Stop button to start recording
the title.
6 Press the TITLE ON/OFF button on the remote
control to stop recording the title. The title
graphics disappear from the viewfinder or LCD
monitor and the camcorder can record nor-
mally.
Recording a Title while Transferring a Tape
1 Connect the camcorder to the VCR (p56).
2? Press the TITLE ON/OFF button on the remote
control to turn title on.
Use the PLAY button to select the title from
memory.
4 Press the TITLE ON/OFF button to turn title off.
5 Turn on the VCR and set it to record. Hold
down the red button on the CAM/OFF/
VIDEO switch while sliding the switch to
VIDEO. Press PLAY on the camcorder,
Note: Create and store your titie before an
event you plan to record. Just press the TITLE
ON/OFF button on the remote control to super-
impose the tite over the scene as you record ff,
This method avoids erasing previously recorded
material which will happen when you record a
tile on a previously recorded tape,
6 Press the TITLE ON/OFF button on the remote
control at the point on the tape where you wish
to record the title.
Press the TITLE ON/OFF button on the remote
control again to stop recording the title.
Note: Recording the fitle during tape transfer
will erase a portion of your recorded material.
VM-E555LA/VM-H755LA/VM-H855LA/VM-H955LA E55