Hitachi VM-E555LA Instruction Manual page 62

12 When simple programmable edit is finished,
the camcorder will enter the stop mode, and
the VCR will enter the record pause mode.
Note: If you make a mistake during program-
ming, start again from the beginning or press
the COUNTER RESET button to return to the pre-
vious steps one by one and enter the correct
program data.
Note: After the simple programmable edit Is
finished, the programmed data is erased, if
you want to continue editing other segments,
repeat steps 5-12.
Note: Most VCRs (recording machine ) may
be released from the record pause mode if it
continues for more than five minutes.
Note: The dubbing start and end positions may
slightly drift from the specified positions when
certain VCRs are used.
as law as possible during dubbing. Otherwise
the played back pictures could be distorted.
E62
To End Programmable Simple Edit
Press the PROGRAM button to remove the pro-
gram display from the viewfinder or LCD monitor.
Then press the stop button on the recording VCR
to set it to the stop mode.
Note: if fhe CAM/OFF/VIDEO switch of the
camcorder is set fo OFF or CAM when the
recording VCR is in the record pause mode, the
VCR enters the record made.
_._Wofe: Reduce the volume of the comearcler nnn
HITACHI