Clock Battery I Rn - Hitachi VM-E555LA Instruction Manual

32. PAL60 Button (Multi Playback)
Use this button when connecting the camcorder to
a PAL TV which handles PAL60 mode signal and
has vertical sync adjustment circuitry for 60Hz.
Notes:
* Make sure "PAL60" is not displayed when
connecting the camcorder to an NTSC TV
for playback, or monitoring the playback
picture on the camcorder's LCD monitor. If
"PALO" is displayed in the above cases, no
color will appear in the picture.
« The PAL6G button is effective during play-
back only.
* See TV instruction manual for detalls about
setting of PAL6O mode,
» Depending on the state of the tape re-
corded, the PAL60 button may not operate
normally.
» Tape recorded on PAL system cannot be
. The PAL6G mode will be released when the
camcorder is turned off.
33. Audio/Video Output Jack
(Behind the jack cover)
For VM-E555LA: Use this jack to connect the cam-
corder to a television ("Connecting to a Television
without Audio In and Video In Jacks", p38).
For VM-H755LA/VM-H855LA/VM-H955LA: Use
this jack to connect the camcorder to a VCR or tele-
vision ("Playing Back Your Recording on Your
TV", p34, 36, 38, "Dubbing from the Camcorder to
a VCR", p56).
VM-E555LA/VM-H755LA/VM-H855LA/VM-H355LA
34. Start/Stop Button
When the CAM/OFF/VIDEO switch is in CAM
press this button to start recording. When pressed
a second time the camera pauses.
During playback use this button to stop the tape
temporarily. Pressing a second time resumes nor-
mal playback.
35. Hand Strap
Refer to page 23.
36. Clock Battery Compartment
Pull the battery holder and install the clock battery
(provided). (See "Loading Clock and Remote
Control Batteries" on page 15.)
37. Power Zoom Control
Use this to zoom automatically ("Using the Power
Button
Use this button to magnify the image being re-
corded 1.5 times.
39. Tripod Mounting Threaded
Socket
Use this threaded socket to mount the camcorder
to a tripod.
E13