Advertisement
Oct-21
STANDARD OPERATING PROCEDURE
DO NOT use this machine unless you have been trained and assessed to a competent level in its sate use and operation, and
have been given permission to use this
Safety glasses must be worn when
operating this equipment
Safety footwear must be worn when
operating this equipment
Safety gloves must be worn when
operating this equipment
PRE-OPERATIONAL SAFETY CHECKS
1. Support load by appropriate means after lifting
2. Do not exceed rated capacity
3. Centre load on the jack
4. Only use attachments and/or adapters supplied with or sold specifically for the jack
5. Only lift areas of the vehicle designated by the vehicle manufacturer.
6. Use as lifting device only
7. Use only on hard, level surface
8. Do not modify jack
OPERATIONAL SAFETY CHECKS
1. This jack should be used for lifting and lowering only. The raised load should be supported on
approved support stands.
supported by this jack.
2. Position the jack to only lift on the areas of the load specified by the manufacturer.
3. Use support stands – after lifting the load always support the load with appropriately rated support
stands before working on the load.
4. Do not overload this jack beyond its rated capacity.
capacity can cause damage to or failure of the jack.
5. Use only on hard level surfaces capable of sustaining the load. Use on other than hard level
surfaces can result in jack instability and possible loss of load.
6. Centre load on jack saddle before lifting vehicle.
7. Off centre loads and loads lifted when the jack is not level can cause loss of load or damage to
the jack.
8. Keep hands & feet clear of the jack hinge mechanism & ground contact area when lowering the
load.
9. NEVER LIFT THE LOAD OFF AIRBAG BRACKETS. ALWAYS LIFT OFF AN AXLE OR CHASSIS LIFT
POINT
10. Use a qualified person to maintain the jack in good condition. Keep it clean for best and safest
performance.
THIS JACK IS A LIFTING DEVICE ONLY & IS DESIGNED FOR LIFTING PART OF THE TOTAL
VEHICLE/LOAD. DO NOT MOVE OR DOLLY THE VEHICLE/LOAD WHILST THE VEHICLE/LOAD
IS ON THE JACK.
No person should get any part of the body under a load that is
Made in China to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au
Long loose hair must be contained when
operating this equipment
Close fitting/protective clothing must be
worn when operating this equipment
Overloading this jack beyond its rated
BTJ1530TA
P a g e
| 2
Advertisement
