Advertisement
Oct-21
2. ASSEMBLY
Step 1:
Screw toggle (taped to bottom of carton with handle in) into the top of the handle.
Remove axle from rear of jack.
Step 2:
Insert hoses from Handle into rear of jack as pictured below.
Step 3:
Insert handle base into slot and thread axle through jack and handle.
Lock in place with circlip
TO LOWER THE JACK, THE SAME AMOUNT OF FREE AIR FLOW IS REQUIRED AS WHEN
PLEASE NOTE:
LIFTING
Made in China to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au
BTJ1530TA
P a g e
| 4
Advertisement
