Advertisement
01/20
STANDARD OPERATING PROCEDURE
DO NOT use this machine unless you have been trained and assessed to a competent level in its safe use and operation, and
have been given permission to use this
Safety glasses must be worn when
operating this equipment
Safety footwear must be worn when
operating this equipment
PRE-OPERATIONAL SAFETY CHECKS
•
This Truck Jack should be used for lifting and lowering only.
supported on approved vehicle stands. No person should get any part of the body under a vehicle
that is supported by this jack.
•
Position the jack to only lift on the areas of the vehicle specified by the vehicle manufacturer.
•
Use support stands – after lifting the vehicle always support the load with appropriately rated
vehicle support stands before working on the vehicle.
•
Do not overload this jack beyond its rated capacity.
capacity can cause damage to or failure of the jack.
•
Use only on hard level surfaces capable of sustaining the load. Use on other than hard level
surfaces can result in jack instability and possible loss of load.
•
Centre load on jack saddle before lifting vehicle.
•
Off centre loads and loads lifted when the jack is not level can cause loss of load or damage to
the jack.
•
Keep hands & feet clear of the jack hinge mechanism & ground contact area when lowering the
load.
THIS JACK IS A LIFTING DEVICE ONLY & IS DESIGNED FOR LIFTING PART OF THE TOTAL
VEHICLE. DO NOT MOVE OR DOLLY THE VEHICLE WHILST THE VEHICLE IS ON THE JACK.
Made in China to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au
Long loose hair must be contained when
operating this equipment
Close fitting/protective clothing must be
worn when operating this equipment
The raised vehicle should be
Overloading this jack beyond its rated
B2003T
P a g e
| 2
Advertisement
