Table of Contents
Advertisement
Step 12 — Installing the sauna heaters
www.insigniashowers.com
Last Modified: 20/12/2023
Install all heater brackets with the
hook on the inside of the shower,
ALWAYS facing upwards. Also use the
round glass protectors over each bolt.
The heater covers simply
slot on and clip into
position.
Connect the wires under the
heaters. Feed the wire up into
the heater to ensure a flush
fitting on the next step.
Ensure each corner is sitting at 90
degrees and slot the heater onto the
brackets. Tap the heater down with a
mallet to lock them into position.
Ensure the connection wire is fed up
inside the heater for a flush fit.
Use the chrome finished
caps to fill in the back of
all glass securing blocks
and both door hinges.
17
Advertisement
Table of Contents
