Fitting The Sauna Heaters - Insignia KYS900 Installation Manual

Step 13 :
Installing the Sauna Heaters
Call Insignia on 01908 317512 for any advice with installation.
Note
Install all heater brackets with the hook on the inside of
the shower. ALWAYS facing upwards. Also use the round
glass prtectors over each bolt.
Note
Connect the wires under the heaters. Feed the wire up
into the heater to ensure a flush fitting on the next step.
Ensure each corner is sitting at 90 degrees
and slot the heater onto the brackets. Tap
the heater down with a mallet to lock them
into position. Ensure the connection wire is
fed up inside the heater for a flush fit.
Note