Page 1
Last Modified: 07/02/2022 INSTALLATION MANUAL KY2216 Sauna Series 30 Day Technical Support: Call 01908 317512 and request technical support for aiding your installation. Replacements Parts: Inside of your warranty period visit: https://www.insigniashowers.com, click support and make a warranty claim.
www.insigniashowers.com Last Modified: 07/02/2022 Contents Thank you for your purchase Connecting the Front Framework Electrical & Tool requirements Framework Install Box contents Door Handle Install Roof Connection Door Hinge Install Roof Lights Installation Door Install Roof Connection 2 Heater and Heater Guard Install Floor Connection Accessories Install Back Panel Connection...
Last Modified: 07/02/2022 Thank you for your recent purchase of an Insignia Sauna. Please read this booklet with great care to ensure you get the best out of your build and have a Sauna that will last for many years to come! Like everything, in order to obtain a first class product that will serve you well for many years, the effort and correctness put into the assembly will reflect in the quality of your finish.
Heater Sauna Rocks (Box) Door Hinge VERY IMPORTANT Have you got everything? If not please contact the Insignia directly on 01908 317 512. Remember NEVER book your tradesman until everything has arrived, been checked and is present. No replacement/missing parts can be obtained free of charge during or after the build.
www.insigniashowers.com Last Modified: 07/02/2022 Step 1 — Roof Connection (Base) 8 x 60mm Screws Locate the 3 roof panels and push them together. Use 8 ST60 Screws and screw the panels together.
Page 7
www.insigniashowers.com Last Modified: 07/02/2022 Step 2 — Roof Connection (Outer Square) 8 x 60mm Screws Locate the 4 outer roof perimeter panels and push them together. Screw 2 ST60 screws in each corner to secure it together.
www.insigniashowers.com Last Modified: 07/02/2022 Step 3 — Roof Lights Installation Locate the LED light strip and place around the inside lip of the outer roof perimeter rectangle. Locate the securing clips and screw them into the inner roof lip to secure the LED strip into position.
Page 9
www.insigniashowers.com Last Modified: 07/02/2022 Step 4 — Roof Connection 12 x 60mm Screws Place the outer roof perimeter rectangle face down and overlay the roof and screw them together using ST60 screws.
www.insigniashowers.com Last Modified: 07/02/2022 Step 5 — Floor Connection 12 x 60mm Screws Locate the 3 floor panels and push them together. Use 8 ST60 Screws and screw the panels together.
www.insigniashowers.com Last Modified: 07/02/2022 Step 6 — Back panel connection Locate the 2 back panels and the top/bottom connecting wooden struts. The top strut has two grooves cut out for wires to feed through. The bottom strut has plastic feet connected to enable manoeuvrability of the Push the panels together, interlocking the grooved cut-outs shown.
Page 12
www.insigniashowers.com Last Modified: 07/02/2022 Step 7 — Back panel connection 10 x 60mm Screws Rotate the top strut so the grooves are facing towards the back of the panel. Push into the connected panels and screw in position using 5 ST60 Screws. Push the bottom strut into the connected panels and screw in position using 5 ST60 Screws.
www.insigniashowers.com Last Modified: 07/02/2022 Step 8 — Side Panel connection 10 x 60mm Screws Repeat the process from the previous step for the right hand side panel. Note the right side panel features the control panel. Once the right panel has been connected, locate the remaining side panel pieces and connect...
www.insigniashowers.com Last Modified: 07/02/2022 Step 9 — Connecting right side panel to the back panel. Lift the side panel and locate the connection brackets. Once the brackets have been located, pull down on the side panel to secure into position.
www.insigniashowers.com Last Modified: 07/02/2022 Step 10 — Connecting left side panel to the back panel. Lift the side panel and locate the connection brackets. Once the brackets have been located, pull down on the side panel to secure into position.
www.insigniashowers.com Last Modified: 07/02/2022 Step 11 — Installing the lower heater guards (back panel) 16 x 50mm Screws Locate the four small rectangle heater guards and fix them to the back panel over the horizontal sauna heaters. Use a spirit level to align and fix in place using 16 x ST50 Screws...
www.insigniashowers.com Last Modified: 07/02/2022 Step 12 — Installing the heater guards (right panel) Locate the heater guards for the triple heater and single 16 x 70mm Screws heater, align with a spirit level and screw in position using 4 ST70 Screws per heater guard. Locate two more single heater guards for the left side panel and secure into position.
www.insigniashowers.com Last Modified: 07/02/2022 Step 13 — Installing the heater guards (back panel) 8 x 70mm Screws Locate the two large heater guards for the double heaters in the back panel, align with a spirit level and screw in position using 4 ST70 Screws per heater guard.
www.insigniashowers.com Last Modified: 07/02/2022 Step 14 — Installing the upper bench 6 x 70mm Screws Locate the upper bench and slide it into position. The bench will sit on the upper bench supports located on the back panel and each side panel.
www.insigniashowers.com Last Modified: 07/02/2022 Step 15 — Installing the lower bench support 6 x 70mm Screws Locate the lower bench support beams, align with a spirit level and screw one to each side panel using 3 ST70 Screws. Ensure both supports are positioned at the same height so the lower bench sits flat.
www.insigniashowers.com Last Modified: 07/02/2022 Step 16 — Installing the lower bench Locate the lower bench and place in position on the lower bench supports. This bench can slide in and out of position to create more room within the sauna if required.
www.insigniashowers.com Last Modified: 07/02/2022 Step 17 — Connecting the front framework The bolts from the side framework slot into the top and bottom framework and are secured in position using a metal washer, crescent washer and a securing nut. Secure all 4 in place using a spanner. Locate the framework and lay out on the floor face down.
www.insigniashowers.com Last Modified: 07/02/2022 Step 19 — Installing the door handle Use the Allen key to unscrew the door handle. Unscrew the inner bolt using a screwdriver and separate the entire handle and all the pieces. Place the door handle, spacer and washer on either side of the door.
www.insigniashowers.com Last Modified: 07/02/2022 Step 20 — Installing the door hinge Unscrew bolts and separate Side View Front View Locate the hinges and dis-assemble before attaching to the fixed glass panel. Tighten...
www.insigniashowers.com Last Modified: 07/02/2022 Step 21 — Installing the door Lift the door into position and then fix the door into the hinges. To realign the door, loosen the bolts slightly, reposition and then retighten. Repeat this process until alignment is perfect.
www.insigniashowers.com Last Modified: 07/02/2022 Step 22 — Installing the roof Lift the door into position and then fix the door into the hinges. To realign the door, loosen the bolts slightly, reposition and then retighten. Repeat this process until alignment is perfect.
Page 28
www.insigniashowers.com Last Modified: 07/02/2022 Step 23 — Installing the rocks heater and heater guard Locate the heater and screw to the left side panel of the inside of the sauna using the 6 screws provided in the heater box. Once in position locate the heater guard and position around the heater. Ensure it is level and screw to the side panel using 4 ST50 Screws...
www.insigniashowers.com Last Modified: 07/02/2022 Step 24 — Accessories Installation Place a screw into the wall and hang the clock. Place a screw into the wall and hang Use two screws through the the hygrometer. backplate and position anywhere within the Sauna.
www.insigniashowers.com Last Modified: 07/02/2022 Step 25 — Electrical Connections Locate all wires on top of the sauna and connect to the corresponding connection from the wires from the back and side panels.
www.insigniashowers.com Last Modified: 07/02/2022 Control Panel Instructions Button 1/2 (Sauna Heaters) Press to activate Sauna heaters. Pressing once will put the heaters on at 100%. Twice = 90%. Three times = 80%. Four times = 70% and five times = Off. Button 3(Lights) Press to cycle through the coloured lights.
Page 32
www.insigniashowers.com Last Modified: 07/02/2022 Audio Functions Radio Tuning: To tune the Radio hold ‘SET’ for two seconds to activate the menus. Press ‘SET’ to bring up manual tuning. Use the arrows to tune to your preferred station. To fast scroll hold the up or down arrow for two seconds. Alternatively, press ‘SET’ again to activate auto tuning then press the ‘Play/Pause’...
www.insigniashowers.com Last Modified: 07/02/2022 Sauna Usage & Safety Guide When you turn it on, you MUST pour water over the rocks as it’s the vapour that creates the heat not the rocks. The rocks alone will never heat up the sauna. Failure to do this could cause the rocks to split and break Never leave children unattended in the Sauna.
(EEE) have to fulfil certain obligations. Under the WEEE directive Insignia is considered the producer of certain products we supply and in line with the demands of the legislation we are pleased to offer the op- portunity to return these products to us for treatment and recycling.
Page 35
www.insigniashowers.com Last Modified: 07/02/2022...