PCB Piezotronics IMI SENSORS EX685A09 Installation And Operating Manual page 23

IECEx Certificate
ITNI
of Conformity
o - - ~w
—
Certificate No:
lECEx LCIE 16.0048X
Issue No: 0
Date of Issue:
2017-03-29
Page 2 of 3
Manufacturer:
PCB PIEZOTRONICS Inc.
3425 Walden avenue
Depew, New York 14043
United States of America
Additional Manufacturing location(s):
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the
IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and
found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in lECEx
Scheme Rules, lECEx 02 and Operational Documents as amended.
STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was
found to comply with the following standards:
lEG 60079-0: 2011
Explosive atmospheres
-
Part 0: General requirements
Edition:6.0
IEC 60079-1 :2007-04
Explosive atmospheres
-
Part 1: Equipment protection by flameproof enclosures "d"
Edition:6
IEC 60079-31:2013
Explosive atmospheres
-
Part 31: Equipment dust ignition protection by enclosure 't"
Edition:2
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the
Standards listed above.
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in
Test Report:
FR/LClE/ExTR1 6.0075/00
Quality Assessment Report:
NL/DEK/QAR14.0004102