Rigging procedures
Flying an L2/L2D array with L2-RIGBAR
Type of deployment
Rigging accessories
Min number of operators
Risk of falling objects
Verify that no unattached items remain on the product or assembly.
Additional safety for own arrays
When ying an array, use available holes to implement a secondary safety.
Prerequisite
Each L2/L2D is secured to its chariot.
Procedure
1. Secure L2-RIGBAR on top of the enclosure using the ball-locking pins.
Secure L2-RIGBAR at the front for a positive initial site angle, or at the back for a negative initial site angle.
70
own array
L2-RIGBAR
2 Ø19 mm shackles WLL 3.25 t
2
See
Securing L2/L2D on L2-CHARIOT/L2D-CHARIOT
(p.51).
L2 owner's manual (EN) version 2.0