3.1 Description
The Ferno® iN∫X® Integrated Patient Transport & Loading System™
("cot") is an emergency patient-handling device designed to transport
a patient over various terrain, to be loaded into and unloaded from an
ambulance, and for transport inside a ground-based ambulance.
The cot is designed for use with the for Ferno® iN∫LINE® series fastening
system. The cot is for professional use by a minimum of two trained
operators. It is designed to help reduce the risk of back injury to medical
service personnel by eliminating or minimizing the amount of lifting
required to extend or retract the legs.
During powered operation, no lifting is required to raise or lower the cot,
or to load the cot into an ambulance or unload it from an ambulance.
The cot may be operated manually when desired.
INCLUDED
Ferno battery charger and adapter cable
●
iN∫X battery
●
●
Sealed vinyl mattress polyurethane foam pad interior
●
Set of patient restraints
Users' manual and training DVD
●
●
ICS® charging contacts standard
FEATURES
700 lb/318 kg lifting capacity (load capacity)
●
●
Independent-leg, powered transport loading system
●
Legs auto-equalize before extending or retracting
●
Safety Lighting System
Variable height adjustment allows level loading into an ambulance
●
with a floor of up to 35" (889 mm)
User-set loading height (maximum 35"/892 mm)
●
IP 56 (Ingress Protection) rating for dust, water
●
●
36-Volt DC power system with dual actuators
●
Multifunction display
Position-indicator lights
●
Simple / operation
●
●
Directional wheel locks (loading-end) standard
●
Sidearm (SX® or fold-down option)
Telescoping handles (control end)
●
Coated handling surfaces keep hands/clothes clean
●
●
4 swivel transport wheels, 6" (152 mm)
●
2 wheel locks
Pneumatic backrest
●
3-position telescoping load-end frame
●
●
2-position shock frame
●
Direct power and non-powered backup systems
12
iN∫X®
3 - ABOUT THE COT
Improper use of the cot can cause injury. Use the cot only
for the purpose described in this manual.
3.2 General Specifications
Specifications are shown in the tables at right. General specifications
are rounded. Metric conversions are calculated before rounding the
Imperial measurement.
Ferno reserves the right to change specifications without notice. For
more information, contact Ferno Customer Relations or your Ferno
distributor (page 2).
Height is the distance from the ground to the patient surface.
●
●
Loading Height is the distance from the ground to the bottom of
the loading wheels.
●
Weight includes the battery but is without mattress, patient
restraints and optional features.
All Ferno mattresses for emergency medical service use are fully-
●
sealed.
WARNING
© Ferno / 234-3622-09 / December 2022