Starting And Stopping Operation; Transportation And Storage - GLP Impression X5 IP Bar 1000 Quick Start And Safety Manual

www.glp.de

8. Starting and stopping operation

Warning! Before you apply power to the impression X5 IP Bar 1000 or
operate it after a blackout, make sure that nobody is looking directly into
the front of the fixture and that there is sufficient clearance for the head
to tilt safely.
The fixture's TRUE1 TOP mains power input connector supports hot-plugging, and
connecting and disconnecting a live power cable is an option, especially if you need
to shut down power urgently, but it is still good practice to shut down power to the
AC mains power circuit before connecting and disconnecting power cables.
To start operation, check that nobody is looking into the front of the fixture and that
there is no risk of collision of the head tilts without warning, then apply power to the
AC mains power circuit.
To stop operation, shut down power to the AC mains power circuit.

Transportation and storage

We strongly recommend that you transport the fixture either in a flightcase or in its
original packaging to protect it from damage during transportation. The product
warranty does not cover damage caused by abnormal shocks during transportation
and handling.
When the fixture is not installed, disconnect it from power and store it in a dry
location.
20 impression
X5 IP Bar 1000 Quick-Start and Safety Manual
X5 IP Bar 1000