www.glp.de
X5 IP Bar 1000
7. Connecting to DMX data
Check that all cables and connectors are suitable for the installation environment
and application (see recommendations in 'Avoiding damage to the fixture' on page
10).
The impression X5 IP Bar 1000 supports USITT DMX 512A, Art-Net and sACN DMX
control data signal protocols. It also supports RDM (Remote Device Management).
The X5 IP Bar 1000 has two 5-pin XLR connectors for IN and THRU connections on a
DMX data link using standard DMX protocol. We recommend the use of digital 110
Ohm DMX cable with original Neutrik 5-pin TOP-type XLR connectors.
If you would like advice with planning and installing a DMX link, your GLP supplier
will be happy to provide assistance.
19
Rev. 20230811-01