Table of Contents
Advertisement
Care and Cleaning (continued)
□ Remove the two lock screws (JJ) and then the speed setting label.
I
□ Remove the three lock screws (KK) to the front guard.
KK
I
Maintenance
□ The fan has permanently lubricated sealed bearings, therefore no further lubrication is required.
□
should not disassemble, repair or rebuild the fan.
□ Only use the original manufacturer's replacement parts, accessories and attachments.
□ After servicing, any safety device (including grilles and blades) must be reinstalled or remounted as previously installed.
□ Remove the eight lock screws (LL) along the guard edge and then
remove the front guard.
JJ
□ After cleaning, reinstall the fan as previously installed and fasten
all the lock screws. Do not blend the blades.
12
I
LL
ians
Advertisement
Table of Contents
