Table of Contents
Advertisement
Care and Cleaning
WARNING: Always switch off and unplug the fan before
cleaning. Never connect the fan to a power supply when
it is not in use, when moving fan from one location to
another, assembling parts, making adjustments, cleaning
or performing maintenance.
GENERAL CARE AND CLEANING
□ Clean your fan periodically to help maintain its new appearance
over time.
□ Do not use any water for cleaning metal surfaces. Do not allow
water to drip on or enter into fan guard, as this could damage the
motor or cause an electrical shock.
□ Do not use a cleaning solution that is harmful to paints or plastics.
Avoid using solvents when cleaning plastic parts. Most plastics
are susceptible to damage from various types of commercial
solvents and can be damaged by their use. Do not use any of the
products, penetrating oils, thinner, benzene, etc. at any time.
□ Slightly moisten a cloth and then wipe off the surfaces of the fan.
□ In order to remove the dust from the grille, use a vacuum cleaner
or a small brush.
DISASSEMBLING THE FAN GUARD AND BLADE
□ When shipped, the blade and guard on the fan are preassembled.
Follow below instructions to disassemble for cleaning purposes.
□ Pull out the decorative cap (E) on the fan guard.
□ Remove the lock screw and nut (II) on the rim.
□ Push down and remove the protecting rim (F).
□ Remove the switch knob (G).
E
11
Please contact 1-855-HD-HAMPTON for further assistance.
II
F
G
HAMPTONBAY.COM
Advertisement
Table of Contents
