Page 4
We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. And we warrant the LED light kit to be free from defects in workmanship and material present at time of shipment from the factory for a period of 3 years after the date of purchase by the original purchaser.
Page 12
Fastening the blades to the blade arms Tighten the blade arm (I) onto the bottom of fan motor Attach the fan blade (A) to the blade arm (I) by using the assembly (H) by using the two blade arm screws (CC). three blade screws (AA) and the three fiber washer (BB).
Installing the light kit assembly Remove the light kit plate (J) from the light kit assembly (K) by removing the three light kit plate screws (LL) from the rim of light kit assembly (K). Keep these three screws (LL) aside for later use. Remove one of the screws (KK) from the mounting plate of the fan motor assembly (H) and loosen the other two screws (KK), but do not remove.
Page 14
Installing the light bulbs and the glass shade Install 2*9W LED bulbs (O) into the sockets. Remove the rubber washer (MM), metal washer (NN), hex nut (OO), metal cap (L) and finial (M) from the light kit assembly (K). Place the glass shade (N) over the light kit stem, secure with rubber washer (MM), metal washer (NN), hex nut (OO), metal cap (L) and finial (M).
Page 15
Fan without Light kit (Optional) Separate the switch box from Installing the switch box only the light kit assembly for non-light use Disconnect the wire connectors (VV) and remove the Push the plastic plug (QQ) into the center hole of the washer (WW), nut (XX), So that the switch box can be switch cup.
Page 16
Attach the pull chain fob (PP) to the chain on the light kit assembly (K) The 3-speed pull chain (YY) The light kit pull chain Reverse Function The reverse switch (ZZ) is located on the surface of the light kit assembly (K).
Page 17
Balancing kit includes an additional instruction manual within the packet.