x
|
x
y
{
50-660 Kotron Model 805 Smart RF Level Transmitter
1.2
NOTE: Confirm the configuration style and process connection size
x
1.2.1 Probe
y
z
}
1.2.2 Transmitter
{
z
|
}
90° Bend
QuickStart Mounting
and type of the Kotron Model 805 transmitter. Ensure it match-
es the requirements of the installation before continuing with
the QuickStart installation.
Confirm the model and serial numbers.
Carefully place the probe into the vessel. Align the probe
process connection with the threaded or flanged mounting
on the vessel.
Tighten the probe using the flats of the probe process con-
nection or flange bolts.
Loosen screw on top of the probe and attach white wire to
probe, making sure that spade lug is at a 90° upward
angle. Tighten probe screw securely. (See figure below)
Place the transmitter on the probe.
Tighten the connection by using the flats on the adaptor.
2