Up-To-Frequency Sensitivity (Pr. 41); Output Frequency Detection (Pr. 42, Pr. 43, Pr. 50, Pr. 116) - Mitsubishi Electric FR-A520-0.4K-NA Instruction Manual

z

Up-to-frequency sensitivity (Pr. 41)

Pr. 41 "up-to-frequency sensitivity"
The ON range of the up-to-frequency signal (SU) output when the output frequency reaches the running
frequency can be adjusted between 0 and ±100% of the running frequency.
This parameter can be used to ensure that the running frequency has been reached or used as the operation
start signal etc. for related equipment.
Parameter
Factory Setting
Number
41
z

Output frequency detection (Pr. 42, Pr. 43, Pr. 50, Pr. 116)

Pr. 42 "output frequency detection"
Pr. 43 "output frequency detection for reverse rotation"
Pr. 50 "second output frequency detection"
Pr. 116 "third output frequency detection"
The output frequency signal (FU, FU2, FU3) is output when the output frequency reaches or exceeds
the setting. This function can be used for electromagnetic brake operation, open signal, etc.
You can also set the detection of the frequency used exclusively for reverse rotation. This function is
z
effective for switching the timing of electromagnetic brake operation between forward rotation (rise) and
reverse rotation (fall) during vertical lift operation, etc.
Parameter
Factory Setting
Number
42
43
50 30Hz
116
Setting Range
10% 0 to 100%
Running frequency
Output signal
OFF
SU
Setting Range
6Hz 0 to 400Hz
9999 0 to 400Hz, 9999
0 to 400Hz
9999 0 to 400Hz, 9999
Related parameters
Pr. 190 "RUN terminal function
Pr. 191 "SU terminal function selection"
Pr. 192 "IPF terminal function selection"
Pr. 193 "OL terminal function selection"
Pr. 194 "FU terminal function selection"
Pr. 195 "ABC terminal function
Adjustable range Pr.41
Time
ON OFF
Remarks
9999: Same as Pr. 42
setting
9999: Function invalid
79
PARAMETERS
selection"
selection"