Lexmark ST9822 User Manual page 93

Understanding the printer menus
Fax Server Setup
General Fax Settings
Menu item
To Format
Reply Address
Subject
Message
Enable analog receive
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Fax Server E‑mail Settings
Menu item
Primary SMTP Gateway
Primary SMTP Gateway Port
1–65535 (25*)
Secondary SMTP Gateway
Secondary SMTP Gateway Port
1–65535 (25*)
SMTP Timeout
5–30 (30*)
Reply Address
Always use SMTP default Reply
Address
Off
On*
Use SSL/TLS
Disabled*
Negotiate
Required
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify a fax recipient.
Note: If you want to use the fax number, then type the number sign (#) before
a number.
Specify a reply address for sending fax.
Specify the fax subject and message.
Set the printer to receive analog faxes.
Description
Type the IP address or host name of the primary Simple Mail Transfer Protocol
(SMTP) server for sending e-mail.
Enter the port number of the primary SMTP server.
Type the server IP address or host name of your secondary or backup SMTP
server.
Enter the server port number of your secondary or backup SMTP server.
Set the time before the printer times out if the SMTP server does not respond.
Specify a reply address for sending fax.
Specify the SMTP reply address for sending fax.
Specify whether to send fax using an encrypted link.
92