Lexmark ST9822 User Manual page 80

Understanding the printer menus
Menu item
Separator Sheets
None*
Between Copies
Between Jobs
Between Pages
Separator Sheet Source
Tray [x] (1*)
Multipurpose Feeder
Pages per Side
Off*
2 Portrait pages
4 Portrait pages
2 Landscape pages
4 Landscape pages
Print Page Borders
Off*
On
Collate
Off [1,1,1,2,2,2]
On [1,2,1,2,1,2]*
Staple
Off*
1 staple, top left corner
"Copy from" Size
[List of paper sizes]
"Copy to" Source
Tray [x] (1*)
Multipurpose Feeder
Auto Size Match
Darkness
1 to 9 (5*)
Number of Copies
1–9999 (1*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify whether to insert blank separator sheets when printing.
Specify the paper source for the separator sheet.
Specify the number of page images to print on one side of a sheet of paper.
Place a border around each image when printing multiple pages on a single
page.
Print multiple copies in sequence.
Specify the staple position for all print jobs.
Note: This menu item appears only when a staple finisher is installed.
Set the paper size of the original document.
Notes:
•
Letter is the U.S. factory default setting. A4 is the international factory
default setting.
•
This menu item may vary depending on your printer model.
Specify the paper source for the copy job.
Adjust the darkness of the scanned image.
Specify the number of copies.
79