Lexmark ST9822 User Manual page 64

Understanding the printer menus
Maintenance
Configuration Menu
Menu item
USB Configuration
USB PnP
1*
2
USB Configuration
USB Scan to Local
On*
Off
USB Configuration
USB Speed
Full
Auto*
Tray Configuration
Tray Linking
Automatic*
Off
Tray Configuration
Show Tray Insert Message
Off
Only for unknown sizes*
Always
Tray Configuration
A5 Loading
Short Edge*
Long Edge
Tray Configuration
Paper Prompts
Auto*
Multipurpose Feeder
Manual Paper
Tray Configuration
Envelope Prompts
Auto*
Multipurpose Feeder
Manual Envelope
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Change the USB driver mode of the printer to improve its
compatibility with a personal computer.
Set whether the USB device driver enumerates as a USB
Simple device (single interface) or as a USB Composite device
(multiple interfaces).
Set the USB port to run at full speed and disable its high‑speed
capabilities.
Set the printer to link the trays that have the same paper type
and paper size settings.
Show the Tray Insert message.
Specify the page orientation when loading A5‑size paper.
Set the paper source that the user fills when a prompt to load
paper appears.
Note: For Multipurpose Feeder to appear, set Configure MP
to Cassette from the Paper menu.
Set the paper source that the user fills when a prompt to load
envelope appears.
Note: For Multipurpose Feeder to appear, set Configure MP
to Cassette from the Paper menu.
63