Lexmark Genesis S815 Setup Manual
Genesis s800 series
Hide thumbs
Also See for Genesis S815:
- User manual (197 pages) ,
- Quick reference manual (97 pages) ,
- Features & benefits (2 pages)
Advertisement
Quick Links
1
Unpack printer
2
Remove tape and packing material from all areas of the
printer
Lexmark S800 Series Installation
Notes:
Do not attach the USB cable until
•
prompted to do so.
Place the printer near the computer
•
during setup. If you're setting up on
a wireless network, then you may
move the printer after setup is
complete.
Contents may vary by model and
•
region.
Advertisement
Related Manuals for Lexmark Genesis S815
Summary of Contents for Lexmark Genesis S815
- Page 1 Lexmark S800 Series Installation Unpack printer Notes: Do not attach the USB cable until • prompted to do so. Place the printer near the computer • during setup. If you're setting up on a wireless network, then you may move the printer after setup is complete.
-
Page 2: Load Paper
Lexmark S800 Series Installation Use slider to extend paper guides Load paper Load paper. Adjust the paper guide. - Page 3 Lexmark S800 Series Installation Extend paper exit tray Pull out the exit tray. Extend the flip-out tray. Connect power cord only Note: DO NOT attach the USB cable yet. CAUTION—POTENTIAL INJURY: Read the safety information included with this product before connecting...
- Page 4 Lexmark S800 Series Installation Make sure printer is on Set language on the printer control panel After setting the language, touch OK. Confirm language Touch if the language is correct. Touch if it is not correct.
-
Page 5: Set Time
Lexmark S800 Series Installation Set country/region After setting the country/region on the printer, touch Accept. Set date After setting the date on the printer, touch Accept. Set time After setting the time on the printer, touch Accept. -
Page 6: Set Time Zone
Lexmark S800 Series Installation Set time zone After setting the time zone on the printer, touch Accept. Open printer Behind the printhead access door, you'll find the touch-screen cloth and customer support label, which contains the following: Model number MAC address... - Page 7 Lexmark S800 Series Installation Close printer From the printer control panel, touch Continue Notes: The alignment page prints. • Do not remove the page until • printing stops. The alignment page may take a while to print and will move in and out during the process.
Need help?
Do you have a question about the Genesis S815 and is the answer not in the manual?
Questions and answers