Lexmark ST9822 User Manual page 203

Troubleshooting
Action
Step 3
a
Remove the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit
to direct light for more than 10 minutes. Extended exposure
to light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drum under the imaging unit. Doing so may
affect the quality of future print jobs.
b
Remove any packing material that is stuck on the imaging unit.
Note: Make sure to remove any obstruction between the
charge roller and photoconductor drum.
c
Insert the imaging unit.
d
Print the document.
Are text or images cut off?
Step 4
a
Replace the imaging unit.
b
Print the document.
Are text or images cut off?
Toner easily rubs off
Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to
Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press
navigate through the settings.
Yes No
Go to step 4. The problem is
solved.
Contact customer The problem is
support. solved.
202
to