Lexmark ST9822 User Manual page 74

Understanding the printer menus
PostScript
Menu item
Print PS Error
On
Off*
Minimum Line Width
1–30 (2*)
Lock PS Startup Mode
On
Off*
Font Priority
Resident*
Flash/Disk
Wait Timeout
Disabled
15–65535 (40*)
Note: An asterisk (*) next to a value indicates the factory default setting.
PCL
Menu item
Font Source
Resident*
Disk
Flash
All
Font Name
[List of available fonts] (Courier*)
Symbol Set
[List of available symbol set] (10U
PC‑8*)
Pitch
0.08–100 (10*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Print a test page that contains the PostScript error.
Set the minimum stroke width of any job printed in 1200 dpi.
Disable the SysStart file.
Establish the font search order.
Notes:
•
Resident sets the printer to search its memory for the requested font
before searching the flash memory.
•
Flash/Disk sets the printer to search the flash memory for the
requested font before searching the printer memory.
•
This menu item appears only when a flash memory is installed.
Set the printer to wait for additional data before canceling a print job.
Description
Choose the source which contains the default font selection.
Notes:
•
Flash and Disk appear only in some printer models.
•
For Flash and Disk to appear, make sure that they are not read‑ or
write‑protected.
Select a font from the specified font source.
Specify the symbol set for each font name.
Note: A symbol set is a set of alphabetic and numeric characters,
punctuation, and special symbols. Symbol sets support the different
languages or specific programs such as math symbols for scientific text.
Specify the pitch for fixed or monospaced fonts.
Note: Pitch refers to the number of fixed‑space characters in a horizontal
inch of type.
73