Table of Contents
Advertisement
5. Select a setting from the list, for example, Pressure.
a. Select the unit, if prompted.
b. Use the arrow buttons to set the desired value, and then select OK or Set.
You can also select to read the value from another probe connected to the indicator,
provided that the probe can output the required compensation parameter. Press
highlight the Read value from field, and then press
source of the value.
For Temperature, always set the temperature value to be read from
another probe. Do not set the temperature value manually. Make sure
that both probes are in the same environment to get the most accurate
measurement values.
6. Exit the menu by pressing
More information
‣ Environmental compensation (page 14)
Chapter 5 – Using probe with Indigo80 handheld indicator
or return to the main menu by pressing
to select the other probe as the
.
to
25
Advertisement
Table of Contents
