Attaching Cable To Probe - Vaisala HMP80 Series User Manual

HMP80 Series User Guide
4. Attaching cable to probe
• Probe connection cable (Vaisala item code 272075SP)
The handle of HMP80 probes has a detachable end piece that protects the probe's cable
connector from mechanical stress, such as physical shocks.
To detach the end piece of the handle and expose the cable connector:
1. Hold the probe firmly in your hands.
2. Grip the end piece of the handle and twist it counterclockwise to detach it.
3. Pull out the end piece.
4. You can now attach a probe connection cable in the HMP80 probe's cable connector.
Before attaching the cable, make sure to insert the cable through the end
piece first.
5. Position the end piece against the probe and twist it clockwise to secure it into place.
16
M212903EN-A