Table of Contents
Advertisement
2. Insert the probe connection cable in one of the ports on the bottom of the indicator.
• Note the orientation of the cable connector when inserting it
• Hold the connector in place while turning its locking ring clockwise –
never twist the connector body!
3. Connect the probe to the M12-5F end of the probe connection cable.
When the indicator recognizes the connected probe, it shows a notification on the display
(for example, HMP80 connected). A probe connected to the leftmost port in the indicator
is labeled
on the indicator's display, while the probe in the rightmost port is labeled
4. To change probes, simply detach the cable from the probe and connect a new probe.
5.3 Measurement location
When taking measurements with the probe, consider the following:
• Verify the operating environment specification of the probe model. The probe head
typically has a much wider operating temperature range than the probe handle.
Chapter 5 – Using probe with Indigo80 handheld indicator
.
21
Advertisement
Table of Contents
