Quick Guide
Updating MD30 software
The MD30 software update overwrites the previous MD30 firmware version with a new version.
Software update package
The most recent software update package is available as a ZIP file at
https://www.vaisala.com/en/support/md30.
The ZIP file contains:
•
MD30 firmware
•
Release notes document
•
Update tool
•
Updating MD30 Software Quick Guide (this document)
•
OSS licenses document for MD30 firmware
Update options
The following update options are available:
•
MD30 and Vaisala RoadAI system: use a Bluetooth connection to update the MD30 software.
•
MD30 and other data collection system: use a Bluetooth connection or a cable connection to
update the MD30 software.
Updating over Bluetooth connection
Figure 1 MD30 firmware update options
More information
‣ Updating MD30 software over Bluetooth connection (page 2)
‣ Updating MD30 software over cable connection (page 6)
Updating MD30 Software
Vaisala Mobile Detector MD30
Software update over Bluetooth requires a Bluetooth module.
PUBLISHED BY
All rights reserved. Any logos and/or product names are trademarks of Vaisala or its individual partners.
Vaisala Oyj
Any reproduction, transfer, distribution or storage of information contained in this document is strictly
Vanha Nurmijärventie 21
prohibited. All specifications — technical included — are subject to change without notice.
FI-01670 Vantaa, Finland
© Vaisala 2020
Updating over cable connection
M212537EN-A