Install Scanner On Io Side; Guest Display Installation; 2Nd Display Rear Mount Installation; 15.6" 2Nd Display Installation - Advantech USC-360 User Manual

Ultra-slim and versatile all-inone pos computer

Hide thumbs Also See for USC-360:

Table of Contents

3.3.3 Install Scanner on IO Side

Remove peripheral cover in side

Remove VESA cover

and cable cover to

expose screw holes

3.4.2 10.1" & 15.6" 2nd Display Installation

Make Type-C cable

traverse the single

hinge stand of 2nd

display firstly.

Plug MSR /RFID module into

USB connector on the right

side.

Before attaching 10.1" display to the

rear of USC-360 with 2pcs screws

(M4*20L), need Type-C cable to

traverse rear mount bracket of 2nd

display.

Plug Type-C cable to Type-C

IO used for DP in USC-360.

Install the module and secure

with 2pcs screws (M3x4L).

Connect the other end of Type-C

cable to Type-C IO used for DP in

USC-360.

Integrated 2nd display stand and

USC-360 stand with the hook

and hole in the stand base.

USC-360 User Manual

Table of Contents