Table of Contents
Advertisement
Installation and service manual
Version 2.5
3.7.4 Multi-leaf damper
If a multi-leaf damper is delivered with the unit, the connecting dimensions of the multi-leaf damper are the
same as the connecting dimensions of the Vent unit and therefore the damper can be connected direct on
supply and exhaust air ducts, respectively.
The rectangular multi-leaf damper, which is available as an extra accessory for the Vent 6 units, is mounted
directly on the suction spigot of the unit by means of four machine screws. The electrical connection is
described under point 4.1
3.7.5 Roof covering
If the unit is to be placed outdoors, it has to be supplied with a roof covering (1) and a shielding for
protection of the electrical control panel (2). The roof covering is supplied in one piece and is fitted to the
unit with the delivered machine screws.
The shielding of the control panel is fixed to the unit by means of the same four screws keeping the control
panel in place.
12
Advertisement
Table of Contents
