Table of Contents
Advertisement
3.3
Moving in Vent R 4 units
If the overall dimensions of VentR 4 are too big to allow transport through the door opening, the cover
panels in front of and behind the rotary heat exchanger can be temporarily dismounted thus reducing the
overall width of the unit to less than 890 mm.
3.4
Fitting of handles
For transport reasons the handles are not fitted from the factory. Fit one handle with lock and one without in
each door. The handle (1) is fixed to the lock with the screw (2), and the plastic blinder (3) is pressed into
the handle.
Installation and service manual
Version 2.5
8
Advertisement
Table of Contents
