Dantherm VentR Installation And Service Manual page 16

Installation and service manual
Version 2.5
5. Start-up
The unit can be started when all installations and connections have been made. Close all inspection doors
and start the unit on the main switch (1). Then choose operational mode on the functional switch (2).
"0" In this position the unit is closed
"MAN" In this position the unit can work without the control unit and without any pre-programming. The
unit then works according to a so-called emergency program. Please see the User's manual.
"AUTO" In this position the unit works in accordance with the settings of the control unit. Use the "AUTO"
position for normal operation.
Further instructions about start up and especially about programming and control of the required running
parameters can be found in the "User's Manual", which is delivered packed together with the unit.
The socket (3) is for connection of the control current of the electric and water heating coils. Please also see
Section 3.7.2 and 3.7.3.
The remaining start-up, especially the programming of the control of the required operational parameters, is
described in the "User's Manual", delivered together with the unit.
16