Dantherm VentR Installation And Service Manual page 17

5.1 Factory settings
By pressing the Man, Auto and Enter buttons at the same time and holding for 10 seconds the factory
default settings for the control system are reverted to. Default values for the ventilation units are as follows:
2:
4:
6:
Air volume K_value:
Pa/Volt:
Max Volt:
Installation and service manual
Factory menu
Air volume K_value
Pa/Volt
Max Volt
Factory menu
Air volume K_value
Pa/Volt
Max Volt
Factory menu
Air volume K_value
Pa/Volt
Max Volt
A factor for the installed EC fan.
A factor used for air filter condition monitoring.
Maximum control signal (0-10V), where the fan motor has reached it's highest
RPM.
Version 2.5
Monday 12:21
0073
0070
0178
09,5
Monday 12:21
0090
0095
0231
09,5
Monday 12:21
0121
0105
0272
09,5
17