Table of Contents
Advertisement
Before You Begin
This section lists the logic analyzers supported by the HP E2465A and
provides other information about the analyzers and the preprocessor
interface.
Equipment Supplied
• The preprocessor interface circuit board.
• The configuration and inverse assembler software on a 3.5-inch disk.
• Configuration software for the HP 16505A Prototype Analyzer on a
3.5-inch disk.
• A 287-pin PGA plastic pin protector/extender socket (HP part
number 1200-1975).
• This User's Guide.
The preprocessor interface socket assembly pins are covered for shipment with
a conductive foam wafer or conductive plastic pin protector. This is done to
protectthe delicate gold-plated pins from damage due to impact. When you're
not using the preprocessor interface, protectthe socket assembly pins from
damage by covering them with the pin protector.
E2465A PowerPC 604 PGA Preprocessor
1-3
Advertisement
Table of Contents
