No Configuration File Loaded; Selected File Is Incompatible; Slow Or Missing Clock - HP E2465A PowerPC 604 PGA User Manual

See Also
If You Have a Problem
0
No Configuration File Loaded"
"No Configuration File Loaded"
This is usually caused by trying to load a configuration file for one type of
module/system into a different type of module/system.
D Verify that the appropriate module has been selected from the Load
{module} from File {:filename} in the HP 16500NB disk operation menu.
Selecting Load {All} will cause incorrect operation when loading most
preprocessor interface configuration files.
Chapter
1
describes how to load configuration files.
"Selected File is Incompatible"
This occurs when you try to load a configuration file for the wrong module.
Ensure that you are loading the appropriate configuration file for your logic
analyzer.
"Slow or Missing Clock"
D This error message might occur if the logic analyzer cards are not firmly
seated in the HP 16500NB or HP 16501A frame. Ensure that the cards
are firmly seated.
D This error might occur
if
the target system is not running properly.
Ensure that the target system is on and operating properly.
D If the error message persists, check that the logic analyzer pods are
connected to the proper connectors on the preprocessor interface. See
Chapter 1
to
determine the proper connections.
E2465A PowerPC 604 PGA Preprocessor Interface A-13