Advertisement
Available languages
Available languages
Left: Battery capacity
5
percentage (%)
Right: Battery voltage(V)
Left: Backup Time(Min)
6
Right: Battery voltage(V)
LCD SETTING CONFIGURATION
There are 22 UPS settings that can be configured by the user.
1.
Press and hold the "ENTER" button for 5 seconds to activate the
setting mode.
The first configuration parameter will be displayed on the LCD screen.
Note: The manual settings programming mode can ONLY be invoked while
UPS is in Bypass mode or Standby mode. To make UPS on Standby mode
or Bypass mode, connect utility power to UPS and do not turn on UPS.
2.
Press the "ENTER" button to select the setting you want to configure.
3.
Press the "ESC" buttons to scroll through the different parameters
and select the parameter you want.
4.
Press the "ESC" button for 5 seconds to cancel and exit setting mode.
5.
Press the "ENTER" button for "5." seconds to save all the settings you
just do and exit setting mode.
20
Advertisement
