Table of Contents
Advertisement
OTHER CONTROLS AND EQUIPMENT
(2
(2
(2
(2
(2
(2
(2
(2
(2
(2
(2
(2
(2)
(2
2
2
2
2
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
(2)
80T070370
2) Push the under-hood release lever (2)
sideways with your finger, as shown in
the illustration. While pushing the lever,
lift up the hood.
CAUTION
The under-hood release lever can be
hot enough to burn your finger while
the engine is running or right after
the engine stopped.
If you try to open the hood while the
engine is running or right after the
engine stopped, touch the under-
hood release lever after it becomes
cool enough.
7-5
NOTICE
If you lift up the hood with the wiper
arms raised, the wiper arms and the
hood may get damaged.
Do not lift up the hood with the wiper
arms raised.
(5)
(3)
(4)
※
80T070040
3) While holding the hood, pull the prop
rod (3) out from the holding clip (4), and
then insert the end of the rod into the
designated hole (5).
CAUTION
• The prop rod can be hot enough to
burn your finger while the engine is
running or right after the engine
stopped. If you would like to use
the prop rod while the engine is
running or right after the engine
stopped, touch the prop rod after it
becomes cool enough.
• If the prop rod slips out, you may
get caught in the closing hood.
Insert the end of the prop rod into
the hole securely.
• The prop rod may slip out when the
hood is blown by wind. If this
occurs, you may get caught in the
closing hood. Be very careful when
you open the hood on a windy day.
NOTE:
When you pull out the prop rod from the
holding clip, hold the
part.
80TS - 01E
- Quick Links:
- Inspection and Maintenance
Hide quick links:
Advertisement
Chapters
Table of Contents
