Suzuki Jimny 2022 Manual page 168

INSTRUMENT CLUSTER
(Selecting 12H/24H format)
• Switch the time indication between 12-
hour and 24-hour format by selecting
"Clock setting" in "Setting mode". Then,
select "12H" or "24H".
Lights
(Lane change setting) (if equipped)
The turn signal and its indicator can be set
whether they flash three times even if you
return the turn signal control lever shortly
after operating it.
• To change the lane change setting,
select "Lane change" in "Setting mode".
Then, select "ON" or "OFF"
• If you want to change the number of
flashing, consult an authorized SUZUKI
dealer.
Guide me light setting
(Light setting) (if equipped)
You can change the lighting time of "To
car" function or "To home" function.
Antitheft
(Theft deterrent alarm system setting)
(if equipped)
You can switch the theft deterrent alarm
system from the enabled state to the dis-
abled state, and vice versa.
The state of the theft deterrent alarm sys-
tem is shown on the information display as
follows:
• Mode A: Disabled state
• Mode D: Enabled state
4-13
IS A/C (Idling stop system setting)
(if equipped)
• When using the automatic heating and
air conditioning system (if equipped),
you can select one of the following
engine auto stop settings.
– Standard
– Economy
– Comfort
• When "Economy" is selected, engine
auto stop condition is eased, compared
with "Standard". As engine auto stop
condition will occur more frequently, the
stop time will be longer, leading to reduc-
tion of fuel consumption.
• When "Comfort" is selected, engine auto
stop condition becomes severe, com-
pared with "Standard". As engine auto
stop condition will occur less frequently,
the stop time will be shorter, leading to
more comfortable cabin condition by air
conditioner.
TPMS
(Tyre pressure monitoring system set-
ting) (if equipped)
• You can check the current tyre pressure
on the information display.
• You can set one of the initial values of
tyre pressure below that are indicated on
the tyre information label.
– Comfort Mode
– Load Mode
Refer to "Tyre pressure monitoring system
(TPMS)" in the "OPERATING YOUR VEHI-
CLE" section for details.
Default
(Initialization setting)
If you select "YES" and push the indicator
selector knob (3), all settings will be reini-
tialized.
80TS - 01E