Suzuki Jimny 2022 Manual page 311

To check the current tyre pressure
(1)
78RB03016
1) When the ignition switch is turned to
"ON" and the vehicle is stationary, push
and hold the indicator selector knob (1)
on the instrument cluster for a while to
change the information display to the
setting mode.
80T050980
2) Turn the indicator selector knob (1) left
or right to select "TPMS" and push the
indicator selector knob.
NOTE:
If you exit the setting mode, select "Back"
and push the indicator selector knob (1).
78RB03018
3) Turn the indicator selector knob (1) left
or right to select "Tyre Press" and push
the indicator selector knob.
OPERATING YOUR VEHICLE
80T050910
4) The display shows current tyre pres-
sure.
NOTE:
• If the low tyre pressure warning light
comes on, the information display will be
switched to "Tyre Press" display and the
corresponding tyre pressure indication
blinks to alert you which tyre(s) is(are)
low pressure.
• The display may not show the tyre pres-
sure for about 10 minutes after the vehi-
cle begins to move. This is because the
TPMS system learns the tyre pressure
within this 10 minutes. The display will
show the tyre pressure after 10 minutes
pass.
5-110
80TS - 01E