Suzuki Jimny 2022 Manual page 207

75RM214
• With the engine on
All electric equipment is operational. The
vehicle can be driven when you have
selected this ignition mode by pressing
the engine switch.
START
Provided you have the keyless push start
system remote controller with you, the
engine automatically starts when you
press the engine switch to select this igni-
tion mode after placing the gearshift lever
in "P" (Park) position and depressing the
brake pedal. (If you need to restart the
engine while the vehicle is moving, shift
into "N".)
NOTICE
Do not leave the engine switch in
ACC or ON mode when the engine is
not running. Avoid using the radio or
other electric accessories for a long
time when the engine switch is in
ACC or ON mode when the engine is
not running, otherwise the lead-acid
battery may discharge.
NOTE:
• The steering will be unlocked when you
press the engine switch to change the
ignition mode from LOCK (OFF) to ACC
or ON.
• You do not need to keep the engine
switch pressed until the engine starts.
• In the presence of strong radio wave or
noise, you may not be able to change
the ignition mode to ACC or ON or to
start the engine using the engine switch.
In this case, the information display in
the instrument cluster will show the fol-
lowing message.
75RM216
OPERATING YOUR VEHICLE
Unreleased Steering Lock Warning
If the steering lock remains engaged when
you press the engine switch to change the
ignition mode to ON, the information dis-
play in the instrument cluster shows the
following message and you cannot start
the engine. If this happens, press the
engine switch, turning the steering wheel
to right or left.
80T050010
80T050030
80TS - 01E
5-6