Instrument Cluster - Suzuki Jimny 2022 Manual

High Beam Assist (if equipped)
The stereo camera can judge the forward
brightness conditions of the lights from the
vehicle in front of you and the street lights.
Depending on this brightness conditions,
high beam (upward) and low beam (down-
ward) of headlights will be switched auto-
matically.
WARNING
The high beam assist has limits and
may not function properly depending
on the surrounding environment. Do
not rely excessively on the system
and always drive in a safe manner.
Switch manually to high beam and
low beam, if necessary.
Upward
80T050410
• Set the knob of the lighting control lever
to the "AUTO" position when the engine
switch is pressed to change the ignition
mode to ON, and you push the lighting
control lever forward with the headlights
on, the high beam assist indicator light
(green) will come on. When you pull the
lighting control lever to its original posi-
tion, the high beam assist function will
be canceled and the headlights will
direct downward in the automatic lighting
condition. The high beam assist will acti-
vate in the conditions which the head-
lights turn on, depending on sensitivity of
the automatic lighting sensor.
• When you drive the vehicle at a speed of
approximately 30 km/h (19 mph) or over
and there is no vehicle in front of you or
no oncoming vehicle, the headlights will
direct upward automatically.
• Under any of following situations, low
beam will turn on.
– When vehicle speed is approximately
25 km/h (16 mph) or under
– When the front of the vehicle is bright
– When the vehicle in front of you turned
on the lights
– When there are many street lamps in
front of you
OPERATING YOUR VEHICLE
• Under all of the following conditions are
met, high beam will turn on.
– When vehicle speed is approximately
30 km/h (19 mph) or over
– When the front of the vehicle is dark
– When the vehicle in front of you is driv-
ing without turning on the lights
– When there is few street lamps in front
of you
Images for activation of high beam
assist
1. When there is no vehicle in front of
you or no oncoming vehicle
High beam
(Upward)
Instrument
cluster
Green Blue
80T050420
The headlights will be switched to high
beam. The high beam assist indicator light
and the main beam (high beam) indicator
light will turn on.
80TS - 01E
5-66