Suzuki Jimny 2022 Manual page 139

Table of Contents

Advertisement

WARNING
It takes about 5 seconds for the light
sensor to react to a change in light-
ing conditions. To help avoid an acci-
dent due to reduced visibility, turn on
your headlights before driving into a
tunnel, parking structure, etc.
NOTE:
The light sensor reacts even to infrared
rays, so it may operate incorrectly when
there are strong infrared rays.
Turning on and Turning off the
Lights (for Hong Kong and Macao
model)
(1)
80T030160
You can turn on the headlights, the posi-
tion lights, the tail lights and the license
plate light.
AUTO
You can automatically turn on and turn off
the headlights, the position lights, the tail
lights and the license plate light by the
automatic lighting system.
You can turn off the headlights, the position
lights, the tail lights and the license plate
light. Also, you can turn on the position
lights, the tail lights and the license plate
light. When you release your hand from
the knob (1) of the lighting control lever,
the position will be returned to "AUTO".
BEFORE DRIVING
NOTICE
• If you turn on the lights for a long
period of time with the engine
stopped,
the
lead-acid
battery
could run out. When the engine is
stopped, do not turn on the lights
for a long period of time.
• If the engine switch is in ON mode
with the knob of the lighting control
lever "AUTO" position and the
lights turn on for a long period of
time, the lead-acid battery could
run out, even though the engine is
not started. This is because the
lights and the position lights are
turned on at the same time as the
outside of the vehicle gets dark. Do
not keep the engine switch in ON
mode with the knob of the lighting
control lever "AUTO" position.
NOTE:
• While the headlights and the position
lights are turned on, the illumination indi-
cator light comes on. Refer to "Warning
and Indicator Lights" in the "INSTRU-
MENT CLUSTER" section.
• For the vehicle with high beam assist,
you can automatically perform directing
the headlights upward and downward
(switching high beam and low beam) by
the high beam assist. Time may lead to
a completely discharged battery. Refer
to "High Beam Assist" in the "OPERAT-
ING YOUR VEHICLE" section.
80TS - 01E
3-26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents