Suzuki Jimny 2022 Manual page 167

Setting Mode
When the ignition switch is in "ON" position
or the ignition mode is ON and the vehicle
is stationary, you can enter the setting
mode of the information display by pushing
and holding the indicator selector knob (3)
for a while.
• To select the setting that you want to
change, turn the indicator selector knob
(3) left or right.
• To change the setting, push the indicator
selector knob (3).
• To exit the setting mode, select "Back"
and push the indicator selector knob (3).
78RB02096
NOTE:
The currently selected setting item is sur-
rounded by a frame.
NOTE:
• If you push and hold the indicator selec-
tor knob (3) to enter the setting mode
when the display (C) shows average fuel
consumption or average speed, driving
time, the value will be reset simultane-
ously. If you do not want to reset the
value, push the indicator selector knob
quickly to switch the indication of the dis-
play.
• If you turn the ignition switch, press the
engine switch or start to move the vehi-
cle when the display is in the setting
mode, the setting mode will be canceled
automatically.
Distance unit
(Odometer / trip meter / driving range /
average speed distance unit setting)
You can change the units in which odome-
ter / trip meter / driving range / average
speed distance is displayed.
Fuel economy
(Fuel consumption unit setting)
You can change the units that fuel con-
sumption is displayed in.
Language
You can change the language of the infor-
mation display.
Fuel reset
(Average fuel consumption reset setting)
You can change when the value of aver-
age fuel consumption is reset.
INSTRUMENT CLUSTER
Temperature
(Temperature unit setting)
You can change the units that temperature
is displayed in.
• To change the temperature unit, select
"Temperature" in "Setting mode". Then,
select "°C" or "°F".
NOTE:
When you change the units that tempera-
ture is displayed in, the automatic heating
and air conditioning system temperature
display units will be changed automatically.
Clock setting
(Adjusting the clock)
• Adjust the clock by selecting "Clock set-
ting" in "Setting mode". Then, select
"Adjust Clock".
• To change the hour indication, turn the
indicator selector knob (3) left or right
repeatedly when the hour indication
appears as reversed color. To change
the hour indication quickly, turn and hold
indicator selector knob (3). To set the
hour indication, push the indicator selec-
tor knob (3) and the minute indication
appears as reversed color.
• To change the minute indication, turn the
indicator selector knob (3) left or right
repeatedly when the minute indication
appears as reversed color. To change
the minute indication quickly, turn and
hold indicator selector knob (3). To set
the minute indication, push the indicator
selector knob (3).
80TS - 01E
4-12