5.3
power supply cord
Check power supply connections. Replace wires in case of wire break, short circuit or me-
chanical damages.
Note
•
Do not shorten the power supply cord! If the customer did so or if a third-party
cord is used, the power supply cord has to be replaced.
•
Check carefully the protective earth conductor for continuity.
5.4
Main switch
Check main switch
Repair instruction
TWINNY T7 / TWINNY T5
Revision B
•
Switch position "0" (OFF):
• Switch position "1" (ON):
Doc. Nr.
Revision
Stand
Created
Released
Modified
resistance > 1MΩ (OL)
resistance < 1Ω
INN_FO_29
1.1 PRI
25.02.2013
16.05.19 FLS
11.05.22 TSC
10.05.22 LG
Seite 21/62